hammer-fx-6.jpg

HAMMER BREAKER

  FX SERIES 

100% ITALIAN HAMMER BREAKER

SB series

mondays

16:30

hammer-serie-sb.png

SB Series Breaker

Series  SB - For Base Machine with Operating Weight from 1.5 to 11 Ton.

Main features:

  • Hoses with fully protected joints.

  • Automatic hydraulic greasing device (optional).

  • Valves for adjusting operating pressure. 

  • Manual adjustment for number of strokes;  

Dust proof:

  • Dust protection system for tunnel work. ​

Waterproof. 

  • Water protection for underwater work.           

 

Energy saving system.

  • Reduces impact for void strikes. 

QUALITY ABOVE ALL

FX SERIES

mondays

16:30

hammer-seriefx (1).png

FX Series Breaker

For Base Machine with Operating Weight from 8.0 to 65 Tons

Main features:

  • Hoses with fully protected joints.

  • Automatic hydraulic greasing device (optional).

  • Valves for adjusting operating pressure. 

  • Manual adjustment for number of strokes;  

Dust proof:

  • Dust protection system for tunnel work.  

Waterproof. 

  • Water protection for underwater work.  

Energy saving system.

  • Reduces impact for void strikes.  

FX-sez-uai-1032x2302_edited.jpg

All the differential of our Breaker in details.

1. Hydraulic hoses mounted on movable joints:  in order to avoid breaking them.

2. Adjusting the working pressure: for the FX series (Fx950-Fx2800) it is possible to adjust the working pressure with a manual adjustment valve positioned in front of the breaker distributor.

3. Dustproof installation and for underwater work: by installing a hose with suitable compressed air in front of the circuit breaker with a pressure of not less than 10 bar, you can prevent dust and water from entering the breaker.

4. Automatic hydraulic lubrication device: (optional, mounted on the breaker): the beka-lube automatic lubrication system optimizes the lubrication procedure and reduces maintenance and downtime.

5. Automatic hydraulic greaser with electrical control:  (optional, mounted on the excavator) Innovative electrical system with automatic greasing, less subject to breakage by vibrations thanks to its grease tank with a capacity of 4 kg or 8 kg, making the system cheaper than all other devices with cartridges.

6. Manual stroke adjustment: for the FX series (FX 950-FX2800): stroke adjustment is done manually by the regulating valve located on the side of the breaker.

7. Hydraulic system for empty shots: inside the breaker there is a regenerative circuit that prevents empty shots when the tool is not in contact with the rock.

8. Piston built with a special geometry:  in order to maintain constant impact energy as well as reduce breakage in critical conditions

9. Anti-dust system for tunnels (optional): the anti-dust system provides for the addition of an anti-dust seal mounted on the lower bushing to prevent impurities from entering the circuit.

DISCOVER OTHER HAMMER PRODUCTS